| PICO-ITX SBC supports Intel® 22nm Atom™/Celeron® on-board SoC, DDR3L, VGA/iDP, GbE, USB 3.0, SATA 3Gb/s, HD Audio and RoHS |
|
 |
| Features |
 |
PICO-ITX SBC supports Intel® 22nm Atom™ or Celeron® on-board SoC |
|
|
12V only single voltage design for AT/ATX power by DC power jack |
|
|
VGA and iDP support dual display |
|
One Key Recovery solution allows you to create rapid OS backup and recovery |
 |
| CPU |
Intel® Atom™ E3845 on-board SoC (1.91GHz, quad-core, 2MB cache, TDP=10W)
Intel® Atom™ E3827 on-board SoC (1.75GHz, dual-core, 1MB cache, TDP=8W)
Intel® Atom™ E3826 on-board SoC (1.46GHz, dual-core, 1MB cache, TDP=7W)
Intel® Atom™ E3825 on-board SoC (1.33GHz, dual-core, 1MB cache, TDP=6W)
Intel® Atom™ E3815 on-board SoC (1.46GHz, dual-core, 1MB cache, TDP=5W)
Intel® Celeron® J1900 on-board SoC (2GHz, quad-core, 2MB cache, TDP=10W)
Intel® Celeron® N2930 on-board SoC (1.83GHz, quad-core, 2MB cache, TDP=7.5W)
Intel® Celeron® N2807 on-board SoC (1.58GHz, dual-core, 2MB cache, TDP=4.3W) |
| BIOS |
AMI UEFI BIOS |
| System Memory |
One 204-pin 1066/1333 MHz single-channel DDR3L SO-DIMM supports up to 8GB (J1900, N2930, E3845, E3827, E3826) or 4GB (N2807, E3825, E3815) |
| Ethernet |
LAN: Intel® I211-AT PCIe controller |
| I/O Interface |
2 x RS-232 (by pin header)
1 x SATA 3Gb/s with 5V SATA power connector
1 x USB 3.0 (on rear I/O)
3 x USB 2.0 (1 on rear I/O, 2 by pin header) |
| Super I/O |
Fintek F81866 |
| Audio |
Realtek ALC662 HD codec supports 5.1 channel |
| Display Interfaces |
Dual independent display
1 x VGA (up to 2560x1600@60Hz)
1 x iDP interface for HDMI, LVDS, VGA, DVI, DP (up to 3840x2160@60Hz) |
| Watchdog Timer |
Software programmable, support 1~255 sec. system reset |
| Power Supply |
12V DC power input only, AT/ATX supported
1 x External DC power jack |
| Power Consumption |
+12V@1.35A (Intel® Celeron® J1900 CPU, 1 x 4GB 1333 MHz DDR3 memory) |
| Graphic |
Intel® HD Graphics Gen 7 Engines with 4 execution units, supporting DX11.1 OpenGL 4.2 and OpenCL 1.2 |
| Operating Temperature |
-20°C ~ 60°C |
| Storage Temperature |
-30°C ~ 70°C |
| Humidity |
5% ~ 95%, non-condensing |
| Dimensions |
100mm x 72mm |
| Weight |
GW:600g / NW:250g |
| Front Panel |
1 x 6-pin (1x6) wafer for power LED & HDD LED
1 x 2-pin (1x2) wafer for power button
1 x 2-pin (1x2) wafer for power reset button |
| Fan Connector |
1 x 4-pin system fan connector |
| LAN LED |
1 x 2-pin (1x2) header |
|
| HYPER-BT-J19001-R10 |
PICO-ITX SBC supports Intel® Celeron® quad-core J1900 (10W) on-board SoC with DDR3L, VGA/iDP, GbE, USB 3.0, SATA 3Gb/s, Audio and RoHS |
| HYPER-BT-N29301-R10 |
PICO-ITX SBC supports Intel® Celeron® quad-core N2930 (7.5W) on-board SoC with DDR3L, VGA/iDP, GbE, USB 3.0, SATA 3Gb/s, Audio and RoHS |
| HYPER-BT-N28071-R10 |
PICO-ITX SBC supports Intel® Celeron® dual-core N2807 (4.3W) on-board SoC with DDR3L, VGA/iDP, GbE, USB 3.0, SATA 3Gb/s, Audio and RoHS |
| HYPER-BT-E38XX1-R10** |
PICO-ITX SBC supports Intel® Atom™ E38XX on-board SoC with DDR3L, VGA/iDP, GbE, USB 2.0, SATA 3Gb/s, Audio and RoHS **This item are by order production, MOQ: 100 |
| 32000-070301-RS |
Dual-port USB cable |
| 32200-000049-RS |
RS-232 cable, 200mm, DB-9 2x5P P=2.0 |
| 32006-000300-100-RS |
PS/2 KB/MS Y-cable without bracket |
| DP-LVDS-R10 |
DisplayPort to 24-bit dual-channel LVDS converter board (for IEI iDP connector) |
| DP-HDMI-R10 |
DisplayPort to HDMI converter board (for IEI iDP connector) |
| DP-DVI-R10 |
DisplayPort to DVI-D converter board (for IEI iDP connector) |
| DP-VGA-R10 |
DisplayPort to VGA converter board (for IEI iDP connector) |
| DP-DP-R10 |
DisplayPort to DisplayPort converter board (for IEI iDP connector) |
| 1 * HYPER-BT single board computer |
1 * Audio cable (P/N:32000-072100-RS) |
| 1 * SATA with 5V output cable kit (P/N:32801-000201-300-RS) |
1 * RS-232 cable (P/N:32200-000049-RS) |
| 1 * Heatsink |
1 * QIG |
| 1 * Utility CD |
1 * One Key Recovery CD |
|
|
 |
|
|
