| Specifications |
| General
Functions |
| Architecture |
PCI / PCI-X |
| CPU Type |
Dual Pentium® 4 Intel® Xeon/LV
Xeon processors |
| CPU Socket |
Socket 604 |
| L2 Cache |
512K, CPU integrated
|
| CPU Voltage |
1.1V~1.85V (VRM 9.1) |
| System
Speed |
1.8GHz~3.06GHz+ |
| CPU External Clock |
133MHz |
| Green
/APM |
APM1.2 |
| Chipset |
Intel® E7501 chipsets
Intel® ICH3-S (82801CA)
Intel® P64H2 (82870P2)
Intel® Firmware Hub (FWH)
|
| BIOS |
Award (4M FWH )
|
| System Memory |
Four DDR 184-pin DIMM sockets
Supports Registered/ECC DDR266 DIMM modules, two 64-bit
DDR channels, max. 8GB
|
| VGA |
ATI Mobility M7 Graphics controller, embedded 32MB
frame buffer (SDRAM), support CRT, LVDS interface, LCD
interface
Two DF13-20 connectors (LVDS dual channel)
|
| LAN |
Intel® 82546EB dual-port Gigabit Ethernet controller
Two RJ45 LAN connector on board
|
| SATA
(Option) |
MARVELL 5041 SATA Single
controller support 4 ports
SATA connectors (PCI-X 100 MHz) |
| Local bus IDE |
ICH3 built-in IDE1, IDE2 (Ultra DMA 33/66/100) |
| LPC
I/O |
Winbond 83627HF: Parallelx1, COM1 (RS-232), COM2 (RS-232/
RS422/RS485), FDC 2.88MB (3 Mode Support), Hardware
monitoring (3 thermal inputs, 8 voltage monitor inputs,
VID0-4, 1 chassis open detection, 3 fan headers)
PCI TO ISA Bridge
Winbond 82628 and 82629 chipsets
|
| ISA High Drive |
Yes
|
Watchdog
Timer
|
256 segments
|
| USB |
Supports four USB 1.1 connectors via pin header
|
| Daughter
board IB910R |
Bridge connection between IB910 and IB910R
IB910 (ICH3-S+P64H2+LAN+VAG+LPC+PCI TO ISA)
IB910R (CPU+DDR DIMM+E7501)
|
| Power Connector |
ATX 12V |
| Hub Link
2.0 Connector |
1 connector |
| PCB Layer |
CPU board 10 Layers and I/O bridge board 6 Layers
Board Size
338mm x 122mm (13.3" x 4.8") |
| Form Factor |
Full Size CPU Card, PICMG
|
| Operating Temperature |
0XC~60XC (32XF~140XF)
|
| Storage
Temperature |
-20XC~80XC (-68XF~176XF)
|
| Relative Humidity |
10%~90% (non-condensing)
|
| IB910 |
Intel® Dual Xeon™ processor-based Full Size
CPU Card with dual Gigabit LAN and ATI M7 32MB VGA |
